Single Arm Electronic Plastic Tensile Strength Testing Machine

Product Detail

Brief Introduction:

This tensile tester is used for testing the plastic films, laminated films , bags , foil , tape , stickers, medical patches , protective film, paper and other products of tensile strength, peel strength, deformation rate , tear strength , heat sealing strength and other performance test.

This tensile test machine can be widely used in production and scientific research, factories, universities and research institutes structure and principle.This tensile strength tester accords to ISO 9073-5:2008,ASTM D3787, ASTM D6796, etc.




Features:

? With precise automatic control and data acquisition system to realize full digitalization adjustment to data acquisition and control process.

? During test, the bearing load, compression deformation and other technical indexes can be measured.

? After tensile test, the above parameters can be calculated automatically through main controller according to the test parameters, which are set before test and meantime display the corresponding test results. All test parameters can be saved and inquired after test, also can be connected with printer to print test reports.

Main Technical parameters

No.	Test Items	Technical Requirements
1	Capacity	300N 500N 1000N
2	Grade/class	Class 0.5
3	Loading measuring range	0.2%-100%FS
4	Load force resolution	1/±300000F.S
5	Deformation measuring range	0.2%-100%
6	Force speed control range	0.005-5%FS/s
7	Force speed control accuracy	speed <0.05%F.S: ±2% ; speed =0.05%FS:±1%
8	Deformation speed control range	0.005-5%F.S/S
9	Deformation speed control accuracy	speed <0.05%F.S: ±2% ; speed =0.05%FS:±1%
10	Displacement speed control range	0.005-500mm/min
11	Displacement speed control accuracy	speed <0.5mm/min: ±1% ; speed =0.5mm/min:±0.5%
12	Effective test span (mm)	400
13	Stroke of cross beam(mm)	980
14	Loading method	Electric
15	Control method	Computer automatically control
16	Working voltage	1ph, 220V±50Hz (good earth-connection)

Software Introduction

1) simple and attractive test interface, real-time record and dynamic display test curve.

2) Reserved data interface facility which can be directly connected to integrated management network of laboratory.

3) support multiple load cell and extensometer.

4) The software should run on Windows98/2000/XP/Win7.

6) Uers can select required test curve, such as Load-Time, Stress-Time, Strain-Time, etc.

7) The software fully compliance with the corresponding international standards like ISO, ASTM and BSEN etc. and also we can program your test standards into our software

8) with different control mode and closed-loop control is feasible.

9) Users can program test procedure as his own requirements

10) Users also can edit test report by adding or delete items as his own requirements

11) User can quickly inquire previous test data by using data inquiry module

12) User can quickly inquire previous test data by using data inquiry module