Computer Controlled Plastic Pipes Ring-stiffness Testing Machine(Max OD2.2 Meter )
-
Payment
-
Origin
China Mainland
-
Minimum Order
1
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Main technical parameter:
Model | XHG-30-2 | XHG-100-2.2 | |
Max load | 30kN | 100kN | |
Accuracy class | Class 1 | ||
Test force resolution | 1/200000FS | ||
Displacement resolution | 0.01mm | ||
Loading speed | 0.1-500mm/min | ||
Return speed | 500mm/min | ||
power supply | AC 220V±10% 50Hz 0.75KW-- 1KW | ||
weight | 250kg | 500kg | |
Test Range (OD) | F110-F2000 | F110-F2200 | |
test width | 500mm | 1020mm |
Performance and feature:
1?Controlled by Microprocessor separately, also can match PC
2?Kinds of protected function
Position limit (max and mix, and can regulated) protection
Overload protection
Over current protection
Protection when stop suddenly etc
3?The function of fast—discharging, data disposal, curve analysis, can print test report and curve.
4?Replacement automatically, Stop automatically and return back as the test over.
5?Inside diameter measure device for your chose, computer connected and can transport data. Kinds of tests like ring-softness, ring-stiffness, compression, weld stretching and creep ratio of the plastic pipes are available on it.
Function and Characteristic of PC Software
1. Replacement automatically: dictate begins as main—controlled computer connected the test, measure automatically.
2. Return automatically: middle-beam return incipient location automatically at fast speed after test piece ruptured (can set)
3. Shift automatically: Alter to proper measurement range according to the load, to insure the definition of measure data.
4. Measure procedure: Test procedure measure, display, analysis, etc done by computer.
5. Display mode: Dynamic display for the data and curve with test procedure.
6. Result reappear: Result can taken or stored optionally, data curve can re-analyzed
7. Curve ergode: After test, can find out force value and distortion data of every point on the test curve with mouse, the test parameter of various materials is convenient and applied.
Result comparison: Test piece curves can stacked and reappear with different colors. Part enlargement effect the analysis and comparison of a test piece
- Computer Controlled Plastic Pipes Ring-stiffness Testing Machine(Max OD3.5 Meter ) 1 Pieces / (Min. Order)
- Chlorophyll Content Meter 5 Pieces / (Min. Order)
- Plastic LCD Melt Flow Index Tester 5 Pieces / (Min. Order)
- Irrigation Sprinkler Water Distribution Testing System 1 Pieces / (Min. Order)
- Plastic Valve Seal Performance Tester 1 Pieces / (Min. Order)
- PPR Pipes Hot&could Water Cycling Tester 1 Pieces / (Min. Order)
- PVC Pipes Methylene Chloride Soak Tester 1 Pieces / (Min. Order)
- Plastic Pipes Falling Mass Impact Tester 1 Pieces / (Min. Order)
- Computer Controlled Plastic Pipes Ring-stiffness Testing Machine(Max OD3.5 Meter ) 1 Pieces / (Min. Order)
- Digital Plastic Carbon Black Content Tester 1 Pieces / (Min. Order)
- Industrial High Temperature Hot Air Ventilated Oven 1 Pieces / (Min. Order)
- MFI Melt Flow Indexer(MFR MVR Test Method ) 1 Pieces / (Min. Order)
- Digital Display Plastic Melt Flow Index Tester(MFR Test Method) 1 Pieces / (Min. Order)
- Computer Controlled Double Column(door Model )Universal Tensile Strength Testing Machine 1 Pieces / (Min. Order)
- Single Arm Electronic Plastic Tensile Strength Testing Machine 1 Pieces / (Min. Order)